| PART |
Description |
Maker |
| DLW31S DLW21SXXXX |
On-Board Type (DC) EMI Suppression Filters
|
Murata Manufacturing
|
| BL02RN1R3J2B BL02RN2R1M2B |
On-Board Type (DC) EMI Suppression Filters
|
ETC
|
| BLM21AG102 BLM15AG102 BLM21PG220 DLW21HN121 NFM41P |
On-Board Type (DC) EMI Suppression Filters
|
MURATA[Murata Manufacturing Co., Ltd.]
|
| NFW31SP207X1E4 NFW31SP106X1E4 NFW31SP157X1E4 |
(NFW31S Series) On-Board Type (DC) EMI Suppression Filters
|
Murata Manufacturing
|
| NFM21CC101U1H3D NFM21CCXXXXX1H3 |
(NFM21C Series) On-Board Type (DC) EMI Suppression Filters
|
Murata Manufacturing
|
| 53254-0710 |
Header; No. of Contacts:7; Pitch Spacing:2mm; No. of Rows:1; Series:Micro-Latch; Connector Body Material:Nylon; Mounting Type:PC Board; Terminal Type:Right Angle Pin 7 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER
|
Molex, Inc.
|
| QPI-10-CB1 |
QPI-10LZ Filter Carrier Board for 48 V VI Chip EMI Evaluation
|
Vicor Corporation
|
| AA07 |
0.4mm Pitch, Stacking Type Board-to-Board(FPC) Connector
|
Japan Aviation Electronics Industry, Ltd.
|
| 10099100 |
SFP IXI Cage EMI FINGER TYPE
|
FCI connector
|
| QPI-8EVAL1 |
CAP 47UF 16V ELECT KMG RAD 评估板有源EMI滤波器与热插
Evaluation Board for Active EMI Filters with Hot-Swap
|
Vicor, Corp.
VICOR[Vicor Corporation]
|
